Ankom 200 Series Manuel d'utilisateur télécharger pdf (Page 28)

Operator’s Manual

pg. 28 Rev C 1/14/15

Replacing the Fuse in a 120V instrument

To replace the fuse in a 120V ANKOM

200

Fiber Analyzer, follow the procedure detailed below.

Turn off the instrument power and unplug the

Power Cord from the outlet.

Using a flat blade screwdriver, twist the slot on

the fuse holders clockwise ¼ turn to open.

Replace the 15 amp glass or ceramic fuse.

Install the fuse in the fuse holder.

Re-install the fuse holder into the instrument.

Reset/replace the Circuit Breaker in a 220V instrument

To reset/replace the circuit breaker in a 220V ANKOM

200

Fiber Analyzer, follow the procedure detailed below.

Turn off the instrument power and unplug the

Power Cord from the outlet.

Push the re-settable circuit breaker in.

If the breaker will not reset, then replace it.

Cleaning the exterior of the instrument

Acid residue left on the exterior of the instrument can damage external electrical components. To clean the exterior

of the instrument, wipe the outside cabinet with a retail window cleaner.

Fuse

Re-settable

Circuit Breaker

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

Pas de commentaire

Ankom 200 Series Manuel d'utilisateur Page 28